Upload and View Gps Track to Android

Trip recording

  • How to use it for Android
  • How to use it for iOS
  • How to view GPX tracks for Android
  • GPX dissever interval (Android)
  • Online tracking (Android)
  • Save navigation routes every bit GPX tracks (Android and iOS)
  • Troubleshoot trip recording (Android)

OsmAnd Trip recording plugin is an essential tool for runners, sportsmen and tourists. Information technology allows yous to tape your motion using your phone'south GPS (and through other networks optionally). If you are going for a run, need to run into your entire road later on a walk around the urban center or measure out the distance y'all covered, the plugin will assistance you.

How to utilize it

Android

Y'all have to enter the Plugins carte, then select Trip recording and tap Enable. That'south pretty much it. To first recording, you need to tap on the GPX widget in the upper-right corner of the map screen. Likewise, y'all tin can choose the logging interval which determines the time between recording moments in your track. The plugin is working now. Y'all can start your trip and meet the distance you've walked in the specific widget on the right. To view your track during recording, please tap 'Show on map'.

There'south also an opportunity to add new waypoints to the track manually. Only tap on the location on map, choose Add GPX waypoint, proper name it the way you want. Then go to My places-> My tracks or to My Tracks dashboard menu and hit the salvage push button. Your waypoint is added to the most recent rail automatically.

You tin can hands pick the color and thickness of your GPX line. To exercise that, please go to Configure map-> GPX track-> Appearance. Y'all can add equally many tracks every bit you lot need to the map past checking them in Configure map-> 'GPX track' menu.

(Image not available offline) (Image not available offline)

Please encounter full video guide below:

iOS

To get the plugin, only go to Maps & Resources - Plugins - Trip recording. Then tap the checkbox next to it. That's it. Just tap the widget on the map screen to showtime recording, set the recording interval and start your trip. When washed, only tap the widget again. You can also beginning a new segment or view rail info in the same menu.

(Image not available offline) (Image not available offline)

How to view GPX tracks

Android

You can view your GPX tracks in OsmAnd or in other software. Also, the track itself can be created by you or imported from an external source. For case, from openstreetmap.org, your local hiking forum or any other place.

The simplest fashion to view a track you've downloaded is to tap on it in your device'south file director and choose to open it in OsmAnd. Afterwards that, you'll see the track in My places-> My tracks or in the Dashboard-> My tracks. To view it the side by side time, just enter 'My tracks' tap 'Show on map' on those you'd like to come across. You lot can read more than about details of the recorded GPX routes here

To view it in Google Earth, go to File > Open up > file blazon GPS (*.gpx, . . .) Navigate to your track and open up.

View OsmAnd GPX tracks in Garmin software

Because OsmAnd GPX format differs from the Garmin one, you lot will need to convert your OsmAnd track into the Garmin format.

Download and install GPSBabel from gpsbabel.org

To exist safe, make a copy of the GPX file to work with.

Open GPSBabel and use the following settings:

  • Input format: "GPX XML"
  • Source file: Copied file equally discussed above
  • Output format: "Garmin MapSource - gdb"
  • Output file same name as input file (i.e. overwrite source - Answer Yes when prompted to over-write)
  • Run GPSBabel ("Utilise" button). If the translation has worked the log screen will say "Translation successful"

Open the converted file in Garmin software (!MapSource, !BaseCamp) in your usual way.

View (and edit/convert) OsmAnd GPX tracks in RouteConverter

Download RouteConverter from routeconverter.de.

RouteConverter can edit and convert GPX tracks and tracks from many other formats. It can be used to create a route and save that every bit a GPX rail, as well.

You tin can as well salvage your every navigation trip as a GPX track automatically. To do that, go to Plugins-> Trip recording-> Settings and choose 'Motorcar-record rail during navigation'. Later on you exercise that, your every navigation trip volition be saved as a GPX rail in the tracks folder.

Accept OsmAnd Trip recording plugin with yous on your trip to make an informative track.

Caution Recording a rails impacts the battery life: even if the screen is off, it continues to run. Bank check it using the notification that OsmAnd is running in the groundwork in your condition bar.

Increasing battery life

Hint: Before putting the device to sleep mode on a long hike, press the dwelling house button then the OsmAnd app goes to the background. If OsmAnd remains in the foreground and the device is often turned on even briefly (perhaps even accidentally, similar by shifting in your pocket or haversack), then GPS would be activated each fourth dimension with very noticeable bear on on your bombardment life. In remote areas with bad or no prison cell reception, you can also prepare the device to "Flight mode" (but with GPS on) to relieve the battery past preventing the cell phone using high transmission power to look for manual towers. You can become skilful twenty hours of recording GPX tracks on hikes with the above parameters.

GPX split up interval (Android)

Split your GPX tracks into intervals by altitude (20 1000 - 10 km) or by time (xv seconds - 60 minutes) to view the details of each interval. View the rise and descent of each part of your track, the maximum and boilerplate speed, likewise as moving time.

Online tracking (Android)

Android

Use our OsmAnd online GPS Tracker. Our application is multifunctional, information technology works including in the zone of unstable Internet connection. All you lot need is to have a Telegram account, additionally install the OsmAnd online GPS Tracker and now y'all can sentinel the movement of each member of your grouping, and they volition be able to see you on the map in real time. More information: what information technology is and how to utilise it, read here.

Save navigation routes as GPX tracks

Android

You can relieve your navigation road as a GPX runway. It will be done automatically every fourth dimension yous utilize navigation. But go to Plugins-> Trip recording-> Settings. Choose 'Car-tape rail during navigation'. You'll come across your tracks in 'My tracks' section and in your osmand/tracks folder. GPX file volition be go on all information about traffic lanes and complete turn instructions.

iOS

On iOS devices the style to save track as GPX is a bit unlike from one on Android. Having recent iOS versions with Files app, yous tin export GPX directly on device with "Save to Files" option in "Export" menu. To export whatsoever legacy trip rail from your iOS OsmAnd application, choose My Places from side menu, select Trips tab, switch from "Active" to "All trips", tap on a trip you lot want to export. Tap "3 dots button" on top of the screen and choose Export.

Troubleshoot trip recording (Android)

Missing points/segments

Sometimes when you tape you seem to miss points/segments, like in the screenshot below (blueish arrows).

(Image not available offline)

The most common reason for this is the "Minimum Accuracy" in the Trip Recording settings (run into below).
Information technology is very tempting to set the "Minimum Accuracy" to someting like five or ten meter, merely if your take your phone in the pocket of your trousers or blouse, the accurateness is often > five meter, so choosing an accuracy of >10 meter is improve. Otherwise the points will not be recorded. The accuracy is the "68% chance that the coordinate falls within the circle with radius ten meters.

(Image not available offline)

But a small-scale office of the route is recorded

The about possible reason for this is "Battery Optimisation". On your phone go to Settings-> Battery. Select the triple-dot menu in the pinnacle right and choose "Battery Optimisation". OsmAnd should not be optimised. If it is optimised it can be stopped/paused by Android.

Note: Switching battery optimisation off tin/will shorten battery life.

(Image not available offline) (Image not available offline)

OsmAnd at Facebook, Twitter, and Reddit!

Join u.s. at our groups of Telegram (EN), (IT), (FR), (DE), (RU), (UA).

Get it on Google Play Get it on Amazon Get it on App Store

wellsarecow1945.blogspot.com

Source: https://osmand.net/features/trip-recording-plugin

0 Response to "Upload and View Gps Track to Android"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel